* Log In to use the Calculate function *


Become a Member!





 
  
Check Shear Stress In Reinforced Masonry Wall:
 
Calculation:
Designer/Checker:
   
Input:  
   
 
(Note: All input Metric units are converted to English units for the equations below and then the output English units are converted back to Metric)
 
ASD Chapter 2, MSJC Code, check shear stress in reinforced masonry wall:
 
   
   
   
Moment on unit length of wall due to lateral load (M - in-lb/ft or N-m/m )
Maximum design shear (V - lb/ft or N/m)
Distance from the extreme compression fiber to centroid of tension reinforcement (d - in or mm)
Specified compressive stress of masonry unit (f'm - psi or MPa)
Width of wall section (b - ft or m)
Net shear area of the masonry (Anv - in^2/ft or mm^2/ft)
Net cross-sectional area of the masonry (An - in^2/ft or mm^2/ft)
Axial compressive load (P - lb/ft or N/m)
Cross-sectional area of the shear reinforcement (Av - in^2/ft or mm^2/m)
Spacing of the shear reinforcement (s - in or mm)
Allowable tensile stress in reinforcement (Fs - psi or MPa)

     
   
   
Output:
 
Login to enable the Formulas!

Not a Member? Join Now!
 
 
 
Shear stress on masonry, fv =
M/Vd =
Max allowable shear stress =
Fvm =
Fvs =
Fv =
 
 
 



Start Using The Calculations >>> Become A Member Now!