* Log In to use the Calculate function *


Become a Member!





 
  
Calculate the Equivalent Length For Minor Losses:
 
Calculation:
Designer/Checker:
   
Input:
 
 
Pipe Diameter (d - in or mm) Sudden Contractions (d/D = 3/4)
Gate Valves (Open) Sudden Enlargements (d/D = 1/4)
Angle Valves (Open) Sudden Enlargements (d/D = 1/2)
Globe Valves (Open) Sudden Enlargements (d/D = 3/4)
Swing Check Valves Entrance to Basin
Butterfly Valves HDPE Fabricated Fittings:  
Elbows - 90 deg. Standard Elbows - 15 deg. Fabricated
Elbows - 90 deg Long Radius Elbows - 22.5 deg. Fabricated
Elbows - 45 deg. Standard Elbows - 30 deg. Fabricated
Tees - Flow Through Run Elbows - 45 deg. Fabricated
Tees - Std Take-Off Elbows - 60 deg. Fabricated
Tees - Run of Tee Reduce One-Half Elbows - 67.5 deg Fabricated
Sudden Contractions (d/D = 1/4) Elbows - 75 deg. Fabricated
Sudden Contractions (d/D = 1/2) Elbows - 90 deg. Fabricated

 
   
   
Output:  
   
Equivalent Length for Minor Losses (L) =
   
 
 
 



Start Using The Calculations >>> Become A Member Now!